Filter
Top Products
English
24
Step 3: Installation and Setup (continued)
Setting your TV channel
programs
Before the recorder can start recording
the TV channel programs, you need to
search for the available TV channels and
store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
recorder, the TV and Satellite Receiver/
Cable Box (if any) and switched them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
SYSTEM
MENU
OK
A
Press SYSTEM-MENU on the remote
control.
The system menu appears on the TV.
B
Use ST keys to highlight
{ System Menu - Channel Setup }
and press X.
System Menu - Channel Setup
Modify Channel Information
Channel Search
Tuner Input Source
Search
Edit
Cable
TIPS: Press X to access the options of an item in the menu.
Press SYSTEM-MENU to exit the menu.
C
Use ST keys to highlight { Tuner
Input Source } and press OK.
{ Cable }
Select this if the DVD recorder is
connected directly to the cable signal or
through a set-top box.
{ Air }
Select this if the DVD recorder is
connected directly to an indoor or
outdoor antenna.
D
Press OK to con rm.
E
Use ST keys to highlight { Channel
Search } and press OK.
The automatic TV channel search
starts. This process may take several
minutes. Once complete, the total number
of channels found will appear on the TV.
To modify or sort the TV channels,
see the chapter “DVD System Menu
Options – CHANNEL SETUP
settings.”