Filter
Top Products
EN - 12
English
12
Hookups (cont’d)
DVD/VCR to a TV and a Stereo
1
Connect the supplied red and white audio cable to the red and white DVD/VCR AUDIO OUT jacks
on the DVD/VCR and to the red and white Audio In jacks on the Stereo. Match the cable colors to the
jack colors.
2
Connect the supplied yellow video cable to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to
the Video In jack on the TV.
To use Component Video cable or S-Video cable instead for the DVD player, see page 11. You will still need the
yellow video cable for VCR features.
3
Connect the power cords of the DVD/VCR, TV and Stereo to a power outlet. Turn on the TV and
set it to the Video In channel. Or, simply go to your TV’s lowest channel (01 or 02) and continue changing
channels downward at the TV until you see VCR or DVD playback on the TV screen.
To help you find the right Video In channel at the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in
DVD mode. With no disc in the player, a large DVD Video logo will appear on the TV screen when you get the TV
on the correct Video In channel.
Turn on the Stereo and set it to the correct auxiliary or source mode. Check your Stereo manual for
details.
4
You are ready to turn on the DVD/VCR. Go to page 15 before turning on the DVD/VCR.
DIGITAL
AUDIO OUT
COAXIAL
AUDI O
OUT
DVD
L
R
L
R
L
R
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
/
P
B
AUDIO OUT
DVD/VCR
VCR
VIDEO OUT
AUDIO IN
VIDEO IN
C
R
/
P
R
VIDEO IN
AUDIO (LEFT) IN
AUDIO (RIGHT) IN
2
1
Back of TV
(example only)
Video Cable
(supplied)
Audio Cable
(supplied)
Stereo
E8E2CCD_E8E2CCH_EN_v1.book Page 12 Friday, March 9, 2012 6:37 PM