Filter
Top Products
EN - 16
English
16
Basic Playback
Video Cassette Playback
Read and follow the steps below to play a tape.
1
Turn on the TV. Set it to the correct Video In channel. (Check
your TV owner’s manual for details.)
Details are on page 9.
2
Insert a tape in the cassette compartment of the DVD/VCR.
VCR light will appear on the front of the DVD/VCR. If the tape’s
record tab has been removed, playback will start automatically.
If the DVD/VCR power is already on, press VCR to put the DVD/VCR
in VCR mode if necessary. VCR light will appear on the front of the
DVD/VCR.
● If playback does not start automatically, press VCR, then press
PLAY B.
● Press STOP C to stop playback.
● Press REW E to rewind the tape.
● After the tape stops, press STOP/EJECT C A on the front of the
DVD/VCR to remove the tape.
Helpful Hint
• Other tape playback features are on
pages30-33.
• If AUTO REPEAT is ON, playback will
begin when you insert a tape, even
when the record tab is intact. Details
are on page 30.
• You must connect the DVD/VCR to a
TV using the audio/video cables in
order to use the VCR features. These
hookups are explained on pages10 and
12.
DVDVCR SETUP
INPUT
MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A-B
AUDIO
BACKPAUSESTOP
PLAY
OK
FFW
REW
CLEAR TITLE
DISC
TRACKING
OPEN/CLOSE
12
6
5
4
7
89
0
+10
3
1
Turn on the TV.
2
Insert a tape in the DVD/
VCR.
E8E2CCD_E8E2CCH_EN_v1.book Page 16 Friday, March 9, 2012 6:37 PM