Filter
Top Products
EN - 28
English
28
Satellite Link (cont’d)
4
Press ▲ or ▼ to set the desired start hour, then press ►.
● The hour can be selected from 1-12 with AM or PM.
● When the external tuner signal is stopped, recording will be stopped
also.
5
Press ▲ or ▼ to set the desired start minutes.
If you wish to go back to the left, press ◄.
6
Press ► to set Satellite Link standby mode.
● “ ” on the DVD/VCR’s display panel lights up and the DVD/VCR
goes to the DVD mode. If you do not use DVD function, turn off the
DVD/VCR.
● If the external tuner is not equipped with timer function, leave it on
for Satellite Link Recording.
● To cancel the Satellite Link function in standby mode :
Press TIMER SET on the remote control or STOP/EJECT C A on this
DVD/VCR.
● To cancel the Satellite Link function while the Satellite Link Recording
is in progress :
Press STOP/EJECT C A on the DVD/VCR.
Helpful Hint
• If you have not set the clock, CLOCK
SET menu will appear at step 3. Refer
to “Clock (VCR)” on page 20.
• You cannot set the ending time for the
Satellite Link Timer Recording on this
DVD/VCR.
• Recording picture will be distorted if
the copy protection signal is being
detected during Satellite Link Timer
Recording.
• When a regular Timer Recording and
the Satellite Link Timer Recording are
overlapped, those recordings are
recorded as illustrated below.
e.g.)In case of the Satellite Link Timer Recording is
overlapped on the existing Timer Recording.
Timer
Recording
recording
result
Satellite Link
e.g.)In case of the Timer Recording is overlapped
on the existing Satellite Link Timer Recording.
Timer
Recording
recording
result
Satellite Link
e.g.)In case of the Timer Recording is programmed
in the middle of the Satellite Link Timer Recording.
Timer
Recording
recording
result
Satellite Link
SATELLITE LINK
SATELLITE LINK
SATELLITE LINK
[ON]
E8E2CCD_E8E2CCH_EN_v1.book Page 28 Friday, March 9, 2012 6:37 PM