Filter
Top Products
30
Connect Peripheral Equipment
& Connect the audio cable to the multi channel Surround receiver and to
AUDIO OUT L and R at the back of your TV receiver box 1.
é If you want the loudspeakers of your monitor to act as centre speaker, also
connect an audiocable to the multi channel Surround receiver and to the
SURROUND SOUND CENTRE IN at the back of your TV receiver box 2.
“ Select Centre mode Yes in the Setup, General menu. See p. 10.
The loudspeakers of the monitor will now only produce centre sound, the
loudspeakers connected to the audio receiver will produce Surround Sound.
The volume has to be controlled via the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is blocked via
the Child lock menu (see p. 18).
Multi channel Surround receiver
See the separate supplied instruction manual with your monitor.
Connect your computer
AUDIO OUT
L
R
1
2
CENTRE
& Insert the plug into the headphone socket L behind the door at the front
side of the receiver. Press the centre of the door to open.
é Press ¬ to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND menu select Headphone volume to adjust the headphone
volume and balance and to select the audio source for your headphone
sound. See p. 17.
Note:When a TV channel or external source is blocked via the Childlock menu
(see p. 18), also the headphone is muted.
When Dual screen PIP is activated (see p. 20):
- if the main screen displays a TV channel picture, you hear the sound from the
Dual screen/PIP picture through your headphone;
- if the main screen displays a picture from an external source, you hear the sound
from the main screen through your headphone.
Headphone
L
1008.3 gb /69 08-07-2002 14:20 Pagina 30