Filter
Top Products
26
9 Adjusting the installation
parameters
Channel Search
Searching for channels
This menu lets you search for all available FREEVIEW channels and
update the channel list.
1 Go to > Configuration > Channel Search.
2 If the recorder lock is activated, enter your parental code (to
change your parental code, see Changing your Parental
code, page 27).
3 Select Automatic search and validate.
A bar shows you the search progress.
4 Once the search is complete, select [Save] and press the
key to save the channels list.
Searching manually for channels
This menu lets you manually search for a specific channel, on a
specific frequency or with a specific modulation.
1 Go to > Configuration > Channel Search.
2 If the recorder lock is activated, enter your parental code (to
change your parental code, see Changing your Parental
code, page 27).
3 Select Manual search and validate with the key.
4 Set your search criteria: press the keys to select a
channel number (21 to 69) or a frequency and validate with the
[OK] key.
5 Select Launch scan and validate with the key to launch
the channel search.
6 Once the search is complete, select [Save] and press the
key to save the channels list.
Notet
• To see the menu tree and learn how to navigate through the
various screens, see Before starting, page 12.
MENU
MENU
LU_HDTP-8530_UK.book Seite 26 Donnerstag, 28. Juni 2012 4:54 16