Philips HTS8000S/69 DVD Player User Manual


 
English
23
3139 115 2xxx1
Playing discs
1
Press SOURCE button until DISC
appears on the display panel.
2 Turn on the TV power and set to the
correct Video In channel. (See page 18
Setting the TV).
You should see the blue DVD
background screen on the TV.
3 Insert a disc into the disc slot.
Make sure the disc label is facing out.
For double-sided discs, load the side you
want to play facing out.
When loading an 8cm disc, slot into
the middle of the disc loader.
EJECT
4 Playback will start automatically.
If a disc menu shows on the TV, see
page 24 Using the Disc Menu.
If the disc is locked by parental control,
you must enter your six-digit password.
(see pages 35~36).
5 To remove the disc, press EJECT (or hold
down the Ç button on the remote).
Auto Eco Power standby mode
This is a power-saving feature, the system
will automatically switch to Eco Power
standby mode if you do not press any
buttons within 30 minutes after a disc has
stopped playing.
Disc Operations (continued)
Basic playback controls
Pausing playback
During playback, press 2;
(PLAY PAUSE).
To resume normal playback, press the
same button again.
Selecting another track/chapter
Press S / T (PREV / NEXT) or
use the numeric keypad (0-9) to key in
a track/chapter number.
If repeat track mode is active, pressing
S / T will replay the same track/
chapter.
Searching backward/forward
Press and hold S / T (PREV /
NEXT).
While searching, pressing S / T
again will decrease/increase the search
speed.
To resume normal playback, press 2;
(PLAY PAUSE).
Stopping playback
Press Ç (STOP).
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
001-047-hts8000s-98-Eng4 3/3/05, 3:42 PM23