Philips HTS8000S/69 DVD Player User Manual


 
32
3139 115 2xxx1
English
DVD Setup Menu Options (continued)
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP MENU.
Accessing Audio Setup Page
1
In disc mode, press SETUP MENU.
2 Press 1 2 to select ‘Audio Setup Page’.
3 Press OK to confirm.
Audio Setup Page
Analog Output
Night Mode
CD Upsampling
Setting the analogue output
Set Analogue Output to match your DVD
home theatre system’s playback capability.
This function can also be accessed via the
SURR. button on the remote.
1 In ‘Audio Setup Page’, press 34 to
highlight { Analog Output }, then press
2.
{ Stereo }
Select this to change channel output to stereo
that delivers sound from only the two front
speakers and subwoofer.
{ Multi-channel }
Select this to enable Multi-channel output.
2 Use 34 keys to select a setting and press
OK to confirm.
Helpful Hint:
This feature is not available for SACD
playback.
Night Mode - turning on/off
When the night mode is activated, the
high volume outputs are softened and
low volume outputs are brought upward
to an audible level (for DVD only). It is
useful for watching action movies without
disturbing others at night.
1 In ‘Audio Setup Page’, use 34 keys to
highlight { Night Mode }, then press 2.
{ On }
Select this to level out the volume.
{ Off }
Select this when you want to enjoy the
surround sound with its full dynamic range.
2 Use 34 keys to select a setting and press
OK to confirm.
CD Upsampling
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality.
If you have activated the CD
upsampling, the system will
automatically switch to stereo mode.
1 In ‘Audio Setup Page’, use 34 keys to
highlight { CD Upsampling }, then press
2.
{ Off }
Select this to disable CD-upsampling.
{ 88.2 kHz (X2) }
Select this to convert the sampling rate of the
CDs twice higher than the original.
2 Use 34 keys to select a setting and press
OK to confirm.
Helpful Hint:
If you press SURR button on the remote
control to select “Multi-Channel” mode, it will
disable the CD upsampling feature.
001-047-hts8000s-98-Eng4 3/3/05, 3:47 PM32