Philips MBD3000/93 Blu-ray Player User Manual


 
37
10 Troubleshooting
Warning
Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, register your product
and get support at www.philips.com/welcome.
Main unit
No reaction to the remote control.
Connect this product to the power
outlet.
Point the remote control at the IR sensor
located on the front panel of this product.
Insert the batteries correctly.
Insert new batteries in the remote
control.
Timer does not work
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Picture
No picture.
See TV manual for correct video input
selection. Change the TV channel until
you see the Philips screen.
No picture on HDMI connection.
If this product is connected to an
unauthorized display device with an
HDMI cable, the audio/video signal may
not be output.
Check if the HDMI cable is faulty. Replace
with a new HDMI cable.
Wave length:
BD: 405 +5 nm/-5 nm
DVD: 650 +5nm/-10nm
CD: 790 +10nm/-20nm
Output power:
BD: Max. ratings: 20mW
DVD: Max. ratings: 7mW
CD: Max. ratings: 7mW
English
EN