Filter
Top Products
English
19
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press ECO POWER/STANDBY-ON 2 or
SOURCE.
➜ The system will switch to the last selected
source.
● Press DISC, TUNER, TAPE or AUX on the
remote control.
➜ The system will switch to the selected source.
Switching the system to Eco
Power Standby mode
● Press ECO POWER/STANDBY-ON 2 in
the active mode.
➜ The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
● The volume level (up to a maximum volume
level of 18), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
● If the system is normal standby with clock display,
press and hold ECO POWER/STANDBY-
ON 2 for 3 seconds or more to switch to Eco
power standby or vice versa.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
Volume control
Adjust VOLUME (VOL + / -) to increase or
decrease the volume level.
➜ Display shows the volume level "VOL" and a
number from 1-31. “MIN” denotes the minimum
volume level and “MAX” denotes the maximum
volume level.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
● To restore the volume, press MUTE again or
increase/decrease the volume level.
Listening through headphones
Connecting headphones to ; will switch off the
speakers. The system will switch STEREO and
the surround sound will be reduced to a stereo
signal which is reproducible by standard
headphones.
Disconnecting the headphones will switch on the
speakers again. If you wish to enjoy surround
sound again, switch the system back to surround
sound.
Sound control
● Press DSC repeatedly to select the desired
sound effect : ROCK, JAZZ, POP or OPTIMAL.
● Press DBB/INCREDIBLE SURROUND on
the system to switch on or off the surround
sound effect or bass enhancement.
➜ The sequences are as follows :
DBB OFF, IS ON ™ DBB ON, IS OFF ™ DBB
ON, IS ON ™ DBB OFF, IS OFF
● You can also press DBB or IS on the remote to
turn on or off the DBB or IS function
respectively.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
Basic Functions
pg001-pg040_MCD510_22-Eng 2005.9.5, 16:2919