Filter
Top Products
22
English
Preparations
– TV System
Allows you to select the color system matching
the connected TV set.
NTSC
– If the connected TV is NTSC system, select
this mode. It will change the video signal of a PAL
disc and output in NTSC format.
PAL
– If the connected TV is PAL system, select this
mode. It will change the video signal of an NTSC
disc and output in PAL format.
AUTO
– If the connected TV is multi system, select this
mode.The output format will be in accordance
with the video signal of the disc.
– Video Out
– Video out selection enables you to choose
the type of video output suitable for your DVD
system.
S-VIDEO
– Select S-VIDEO if you have connected the
S-VIDEO output to your TV using S-VIDEO jack.
SCART
– Select SCART if you have connected the
video output to your TV using SCART OUT jack.
To remove the menu
Press SYSTEM MENU.
To resume playback
Press 2; (PLAY/PAUSE 38 on the remote).
– TV Shape
Selects the aspect ratio of the TV to be
connected.
4:3 PS (Pan and Scan mode )
– If you have a conventional TV set and your
DVD is not formatted for widescreen viewing, use
this setting. A wide picture is displayed on the
whole TV screen with a portion automatically cut
off.
4:3 LB (Letterbox mode )
– If you have a conventional TV set and your
DVD is formatted for widescreen viewing, use this
setting. A wide picture with bands displayed on
the upper and lower portions of the TV screen.
16:9 (Wide screen mode)
– If you have a widescreen TV set, use this
setting (you must also set your widescreen TV to
“full size”) available on a disc, then the disc’s own
preference will be used.
Note:
The format you select must be available on the disc.
If it is not, the setting for TV Shape will not affect the
picture during playback.
pg001-pg040_MCD510_22-Eng 2005.9.5, 16:2922