Filter
Top Products
25
• [NTSC] – For TV with NTSC color
system.
• [Multi] – For TV that is compatible
with both PAL and NTSC.
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
• [4:3 Pan Scan] – For 4:3 screen TV:
full-height display with the trimmed
sides.
• [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars
on the top and bottom of the screen.
• [16:9 Wide Screen] – For wide-
screen TV: display ratio 16:9.
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality. Video connection
through Component Video is required.
• [Off] – Disable progressive scan mode.
• [On] – Turn on progressive scan mode.
Tip
There is more detailed description available •
(see ‘Get started’ > ‘Turn on Progressive
Scan’).
[Picture Settings]
Select a predefi ned set of picture color
settings or customize your personal setting.
• [Standard] – original color setting.
• [Bright] – vibrant color setting.
• [Soft] – warm color setting.
• [Personal] – customize the color
setting. Adjust the level of brightness,
contrast, sharpness/tint and color
saturation.
4:3 Letter Box (LB)
4:3 Pan Scan (PS)
16:9 (Wide Screen)
Convert the music CD to a higher sampling
rate using sophisticated digital signal
processing for better sound quality.
• [Off] – Turn off CD-upsampling.
• [88.2kHz (X2)] – Convert the sampling
rate of the CDs twice as high as the
original rate.
Note
CD upsampling is only available in stereo •
mode.
[Audio Sync]
When you play a video disc, set the default
delay time for audio output.
1) To start, press OK.
2) Select a speaker delay in the menu, then
press
/ to set the delay time.
3) Press OK to confi rm and exit.
Video setup
1 Press SYSTEM MENU.
» [General Setup] menu is displayed.
2 Press to select [Video Setup], then
press
.
3 Select an option, then press OK
4 Select a setting, then press OK.
To return to the previous menu, •
press
.
To exit the menu, press • SYSTEM
MENU.
Note
See the explanations of the above options in •
the following pages.
[TV Type]
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
• [PAL] – For TV with PAL color
system.
English
EN