Philips MDV450 DVD Player User Manual


 
18 Rear Panel
Y CB CR (VIDEO OUT) jacks
Connect component video cables (not supplied)
here and to the Component Video In jacks of a TV.
Details are on page 12.
VIDEO (VIDEO OUT) jack
Connect the supplied video cable here and to the TVs
Video In jack. Details are on page 10.
AC Power cord
Connect to a standard AC power outlet
after completing all other connections.
AUDIO OUT (left/right) jacks
Connect the supplied audio cables here and to
the AUDIO IN jacks on your TV or Stereo.
Details are on pages 10-13.
COAXIAL jack
Connect a digital audio coaxial cable (not
supplied) here and to the Digital Audio Coaxial In
jack of a Stereo. Details are on page 14.
S-VIDEO (VIDEO OUT) jack
Use an S-video cable (not supplied) to
connect this jack to the S-Video In jack
of your TV. Details are on page 11.
OPTICAL jack
Connect a digital audio optical cable (not supplied)
here and to the Digital Audio Optical In jack of a
Stereo. Details are on page 14. Replace the OPTICAL
jack cap when the jack is not in use.
You only need one audio and one
video connection, so you will not
use all the jacks on the DVD
Player.
Helpful Hint
MDV450 25/09/2002 9:46 AM Page 18