Filter
Top Products
Still Picture/Frame-by-Frame Playback,Time Search 21
Still Picture/Frame-by-Frame Playback
1
To pause a DVD or Video CD picture, press PAUSE
88
on
the remote control during playback.
2
Press PAUSE
88
repeatedly to advance the still picture one
frame at a time.
3
Press PLAY
33
to resume regular playback.
DVD
VIDEO CD
1, 2
3
Time Search
1
Press the DISPLAY button during playback. Current playback
information will appear at the top of the screen.
DVD example
2
Press
22
repeatedly to select the counter numbers beside
TC. This shows the amount of time that the Disc or Track has been
playing, or the elapsed playing time.
3
Press the Number buttons to enter the elapsed playing time
at which you want to resume playback, then press OK.
Enter the elapsed playing time in hours, minutes, and seconds.
For example, if the current DVD is a two-hour movie and you want
to jump to the middle of the movie, press 0,1,0,0,0,0, then press OK.
The movie will resume playing at an hour into the movie.
4
Press DISPLAY to remove the information from the top of
the screen.
DVD
VIDEO CD AUDIO CD
T: 1 / 3 C: 12 / 30
TC: 00:37:58 3D OFF
T: 1 / 3 C: 12 / 30
TC: 00:37:58 3D OFF
3
1,
4
2
3
• When you press DISPLAY, the counter will appear in
the Information box at the top of the screen.TC
usually appears beside the counter.You can change
the counter type by pressing 1 or 2 to choose TC,
then pressing 3 or 4 to choose CC, CR,TC, DC, DR,
or TR.The counter will change to represent:
CC - elapsed playing time of current Chapter;
CR - remaining playing time of current Chapter;
TC - elapsed playing time of current Title or Track;
TR - remaining playing time of current Title or Track;
DC - elapsed playing time of current Disc;or
DR - remaining playing time of current Disc.
The counters will be available according to the type of
Disc in the DVD Player.
Helpful Hint
MDV450 25/09/2002 9:46 AM Page 21