Filter
Top Products
14 Hookups (cont’d)
Connecting to a TV and to a Six-channel Receiver (Dolby Digital or DTS)
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/
Dolby Digital-DTS
FRONT
MULTICHANNEL AUDIO OUT
FRONT
CVBS
VIDEO OUT
AUDIO
OUT
S-VIDEO
Y
Pb/CbPr/Cr
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
Receiver
(example only)
SURROUND
CENTER FRONT
Back of TV
(example only)
VIDEO IN
VIDEO IN
L
SURROUND
MULTICHANNEL AUDIO IN
SUB WF FRONT
R
L
1
2
1
Connect the supplied yellow video cable to the Player’s yel-
low CVBS (VIDEO OUT) jack and to the corresponding
VIDEO IN jack on your TV. There are two CVBS (VIDEO OUT)
jacks in case you want to connect the Player to two separate TVs.
For simply connecting the Player to a single TV, you may use either
of the jacks, but you will not have to use both.
2
Connect the Player’s CENTER jack to the Receiver’s CEN-
TER IN jack. Connect the Player’s SUB WF. jack to the
Receiver’s SUBWOOFER IN jack (or directly to the
Subwoofer itself if possible).
3
Connect the Player’s right/left FRONT jacks to the
right/left FRONT IN jacks on your Receiver.
4
Connect the Player’s right/left SURROUND jacks to the
right/left SURROUND IN jacks on your Receiver. Your
Receiver may refer to Surround as Rear. These are the same.
5
Connect the power cords of the Player, TV, and Receiver
to a power outlet.
Press STANDBY-ON on the Player to turn on the Player.
The red Standby light will disappear.
6
Turn on the TV and set it to the correct Video In channel.
Refer to your TV manual. Or, change TV channels until you see
the Player’s blue screen saver on the TV screen.
Turn on your Receiver and set it to the correct Audio In
channel or sound source. Refer to the Receiver’s manual.
7
Set Analog Output to Multi-channel. Details are on page 40.
Adjust the Speakers if necessary. Details are on page 41.
• Cables for the connections to
the Receiver are not supplied
with the Player.
• You may use S-Video or
Component Video connections
instead for higher picture quali-
ty. These options must be avail-
able on your TV. Details are on
pages 10-11.
Helpful Hints