Filter
Top Products
20 Rear Panel
MULTICHANNEL AUDIO OUT
If you have a multiple channel Receiver (one that has con-
nections for six speakers), connect the MULTICHANNEL
AUDIO OUT jacks on the Player to the corresponding In
jacks on the Receiver. Details are on page 15.
AC Power cord
Connect to a standard AC outlet to supply power to the Player.
COAXIAL (DIGITAL AUDIO OUT)
Connect an optional audio coaxial digital cable here and to the
coaxial digital Audio In jack of a Stereo. Details are on page 14.
OPTICAL (DIGITAL AUDIO OUT)
Connect an optional audio optical cable here and to the optical
digital Audio In jack of a Stereo. Details are on page 14. When
the OPTICAL jack is not in use, replace its protective cap.
CVBS (VIDEO OUT)
Connect the yellow video cable (supplied) here and to the TV’s
Video In jack. Details are on page 10.
Progressive/Interlace switch
Set this switch to Progressive if you have a Progressive Scan
TV and you connected the DVD Player to the TV using the
Player’s Y Pb/Cb Pr/Cr jacks. Your connection will be as
shown on page 12.
Otherwise, set the switch to Interlace. If you do not, you
may not have a picture at the TV from the DVD Player.
AUDIO OUT (Left/Right)
Connect the supplied red and white audio cables here and
to the Audio In jacks of a television or Receiver. Details are
on pages 9-13.
Pr/Cr Pb/Cb Y VIDEO OUT
Connect component video cable here and to the component
Video In jacks of a TV. Details are on page 12.
S-VIDEO (VIDEO OUT)
Connect an S-Video cable here and to the
S-Video In jack of a television. Details are on page 11.
•
Do not touch the inner pins of
the jacks on the rear panel.
Electrostatic discharge may
damage the unit permanently.
Caution