Philips DVDQ50 DVD Player User Manual


 
14 Hookups (cont’d)
Connecting to a TV and a Stereo Receiver
(Receiver has PCM, Dolby Digital
TM
, MPEG2, or Digital Theater System)
MAINS
SURROUND
MULTICHANNEL AUDIO OUT
SUB WF FRONT
AUDIO
OUT
CVBS P
r
/C
r
P
b/
C
b
VIDEO OUT
Y S-VIDEO
OPTICALCOAXIAL
P
r
/C
r
P
b/
C
b
Y
PROGRESSIVE SCAN OUT
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
SURROUND
CENTER FRONT
R
L
R
L
2
1
Back of TV
(example only)
S-Video In
COAXIAL DIGITAL
AUDIO IN
S-Video In
Receiver
(example only)
1
Connect one of the DVD Players DIGITAL AUDIO OUT
jacks (COAXIAL or OPTICAL) to the corresponding
DIGITAL AUDIO IN jack on your Stereo. You only need
one connection. Use a digital audio cable (not supplied).
2
Connect the supplied S-Video cable to the S-VIDEO OUT
jack of the DVD Player and to the TVs S-VIDEO IN jack.
Or, use the CVBS VIDEO OUT jack or Component VIDEO OUT
jacks. Details are on pages 10 and 12. You only need one video
connection.
3
Connect the flat end of the DVD Players power cord
(supplied) to the MAINS (AC Power) jack on the back of
the DVD Player.
Connect the power cords of the DVD Player, TV, and
Stereo Receiver to the power outlet. Turn on the power
of the TV and the Stereo Receiver. Press STANDBY-ON
on the front of the DVD Player to turn on the DVD
Player. The Standby light will disappear.
4
Set the TV to the correct Video In channel. Refer to your
TV manual. Or, change TV channels until you see the DVD
logo on the TV.
Set your Stereo Receiver to the correct Audio In channel
or sound source. Refer to the Stereos manual.
5
Set the DVD Players digital output. Details are on page 47.
2
1
3
If your Digital Output setting
does not match your Stereo’s
capabilities, the Stereo may pro-
duce a strong, distorted sound or
no sound at all.
You can obtain a six-channel digi-
tal surround sound with this con-
nection only if your Stereo has a
digital multi-channel decoder.
Your Stereo must support
MPEG2, Dolby Digital
TM
or
Digital Theater System (DTS).
Check the Stereo’s manual.
When playing MP3 files, you
may not hear sound if you use
the DIGITAL AUDIO OUT jacks.
See page 40 for details.
You may connect a subwoofer
(not supplied) to the SUB WF.
OUT jack on the DVD Player.
Follow the instructions supplied
with the subwoofer.
Helpful Hints