Filter
Top Products
English
RECORDING 33
When all timer blocks are full, the options timer
programming and SHOWVIEW programming cannot be
accessed. For clearing a timer block, see ‘How to clear a
timer block’.
Timer programming with the SHOWVIEW
®
system
A SHOWVIEW programming number is a number of up to
nine digits, printed in most TV guides next to the start
time of a TV programme.
All the information required for a programming is
contained encoded in the SHOWVIEW programming
number.
l Press TIMER on the remote control.
l Select ‘
ShowView programming
’ with v (up
cursor) or w (down cursor).
l Press u (right cursor).
l Enter the entire S
HOWVIEW programming number
(up to nine digits) printed in your TV guide next to
the start time of a TV programme. If you made a
mistake, you can correct it with CLEAR.
l Confirm with OK.
l If the SHOWVIEW system does not recognize the TV
channel, the message ‘
Please enter programme
number
’ will appear on screen. Select the required
programme number (programme name) with tu
(left right cursor) or the digit keys 0-9 and confirm
with OK.
‰ The data will appear on the TV screen.
l Use SELECT to select the programming key at
daily or weekly intervals. ‘
Mo-Fr
’: Recording at
daily intervals from Mondays to Fridays inclusive.
‘
Weekly
’: Recording at weekly intervals on the same
day of the week.
l Press u (right cursor).
l Use SELECT to switch VPS/PDC on or off.
‰ When VPS/PDC is switched on, the start time is
marked with an asterisk.
l Press u (right cursor).
l Use SELECT to select the recording mode (‘
HQ
’,
‘
SP
’, ‘
LP
’, ‘
EP
’).
Timer
ShowView programming
Please enter
programme number
Timer
Mo- Fr/Weekly
Press SELECT
To store
Press OK
ShowView programming
ShowView number
Timer
To exit
Press TIMER
ShowView programming
Timer programming
Timer list
CLEAR SELECT
TIMER
What is ’VPS’/‘PDC’?
With ’VPS/PDC’, the TV station controls the
beginning and the length of the programmed
recording. This means that the video recorder
switches itself on and off at the right time even if a
TV programme you have programmed begins earlier
or finishes later than expected.
Usually the start time is the same as the VPS/PDC
time. If, however, in the TV guide, in addition to a TV
programmes start time, a different VPS/PDC time is
given, e.g.: ’20.15 (VPS 20.14)’, you must enter ’20.14’
as the start time exactly to the minute. If you want
to enter a time that differs from the VPS/PDC time,
you must switch off ’VPS/PDC’.