Philips VR960BPH VCR User Manual


 
Timer Recording with the VCR Plus+ Programming System (cont’d) 39
Turn off the VCR for a timer recording! Put a tape
in the VCR. Leave the Cable Box/DBS on.
9
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place. The
r
light will appear on the display panel. The
r
light and the
Cassette-Inside light will flash when you turn off the VCR if there is
not a tape in the VCR.
7
Press the ALT/SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the OK/STATUS or TIMER button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-screen
display will disappear.
Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday. The recording
will not occur, even though the VCR
may accept the way you programmed
the recording.
To exit the VCR Plus+ programming
system at any step, press the TIMER
button.
If the timer recording you just
programmed overlaps another timer
recording, PROGRAM NOT
COMPLETED/PROGRAM OVERLAP
will appear. Details are on page 46.
If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER
RECORDING flashes on your TV
screen two minutes before a timer
recording is set to begin. To remove
the message, press the CLEAR button.
To check your timer recordings, see
page 45.
Helpful Hints
6
If you want to record the program one time only, go to
step 7. You also may press the Number 8/DAILY or
Number 9/WEEKLY button repeatedly to select a ONE TIME
PROGRAM.
If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a
program every day from Monday through Friday, starting at the
same time and recording for the same length of time.
If you want to record the program every week, press the
Number 9/WEEKLY button so that WEEKLY PROGRAM
appears at the top of the screen. The VCR will record a
program on the same day, at the same time, for the same length of
time every week.
5
Press the OK/STATUS button. If the VCR PLUS+ and
CABLE/TV channel lists appear on the screen, the CABLE/TV
channel has not been set for the VCR PLUS+ channel of the
program you have set in step 4. Press the Number buttons to enter
the CABLE/TV channel number from your list on page 36, then
press the OK/STATUS button.
DAILY PROGRAM (MON-FRI)
PROGRAM 1
CHANNEL +/– 12 CABLE/TV
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 06/21/00
WEDNESDAY
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
5
7
6
8
9
VCRTV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CHVOL
OK/STATUS
TIMER
TURBO REC END
MENU
-
+
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS
DAILY
PLAY
REW FF
STOP
WEEKLY
/OTR
RECREC
-
+
-
+
SPEED
0
CLEAR
.............
.............
........
........
SEARCH
MUTE
TIMER
AUDIO/ SKIP
SEARCH
EJECT
ALT
-
-