Philips SL400I TV Receiver User Manual


 
34 ENGLISH
Chapter 11 - Overview of SL400i connections
1 Connect a SCART (EURO) cable between the lower SCART audio/video connection #
of the SL400i and your TV.
> This will enable you to view the user menus and multimedia content on the television
screen.The television will also provide audio playback.
See the chapter ‘Options menu’ on page 35-39 of the extended User Manual on
CD-ROM for choosing the connection type (RGB or CVBS): For best video performance,
select RGB (check the manual of your TV).
If your TV goes blank after switching to RGB mode, then your TV does not support RGB.
In this case, select CVBS again on the LCD display.
2 As an option, you can connect a SCART (EURO) cable between the upper SCART
audio/video connection @ of the SL400i and an existing VCR/DVD unit.
> This is a loop-through connection, which enables you to connect the SL400i between
your TV set and an existing VCR/DVD unit.
By switching on the SL400i, you will change over from your existing VCR/DVD audio/video
signal to the SL400i audio/video signal. Switch the SL400i to standby to change back again.
3 Connect a stereo audio cable between the Audio L/R output (stereo) ! of the SL400i
and the audio input of your sound system.
> Making this connection enables you to listen to audio playback through your sound
system.
4 As an option, you can connect a coax digital audio cable between the Digital audio
output (coaxial) 0 of the SL400i and the digital audio input of your sound system.
If your sound system has a coaxial digital audio input, you can use this connection for
digital audio playback.The digital audio output is always on, and provides a PCM digital
audio signal if this is supported by the media being played.
5 If you want to use the Ethernet port $ on the SL400i, see the chapter on making a
wired network connection on page 15-17.
6 Connect the mains cable between the AC Mains input 9 of the SL400i and a mains
socket that provides electrical power.
> The indicator in the Power button lights up after connecting the SL400i to the mains.
VCR/DVD
Audio
Audio
PC