Philips SRM7500 Universal Remote User Manual


 
© 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium) SRM7500 - Instructions for Use
When you want to exit the Setup menu and go:
Directly to your playlists, press on the remote.
To your last selected device, press on the remote.
Add a Device
To be able to operate your devices with your SRM7500, you have to
add these devices to the remote control. You can add up to 6 devices
from the list of available devices.
You cannot add a device twice. Once you have added a device to your
remote control, it disappears from the list. However, the list of devices
contains ‘TV-2’ or ‘VCR-2’ when you want to program a second TV or a
second VCR.
1 Select the option Add a device in the Setup menu by using the
cursor keys and press .
Note If you already added 6 devices on the remote, apart from your
PC Media Center, you will be asked to delete a device.
Refer to page 17 on how to delete a device.
2 Select the device and brand you want to add and press .
The remote will search for available codes for the brand.
3 Follow the onscreen instructions to test the codes.
When a working code set is found, your device is correctly
installed.
When no working code is found,
You can perform a full database search to find a correct code
set.
This means that the remote will send out all codes available in the
database until a working code is found. Keep in mind that it can
take up to 25 minutes to scan the entire database.
You can learn the codes from the original remote of the device.
Refer to chapter ‘Fix a Key’ on page 17 for more information on
how to learn codes.
When the device is installed, the following screen appears.
SRM7500 - Instructions for Use
16