Filter
Top Products
© 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium) SRM7500 - Instructions for Use
Installing the Remote Control
The initial installation of your remote is divided into 2 main parts:
• Preparing the PC you want to contr
ol with the SRM7500 by
installing the MediaControl software and the USB transceiver,
enclosed.
• Configuring the remote control to set up the connection to the
corr
ect PC and define the devices the SRM7500 will work with.
Preparing Your PC
Warning It is very important to follow the specified sequence of actions
during the installation.
First you need to install the software. This software controls the
connection of the SRM7500 to the host PC and will allow you to use
the features of your media player. Only then you can insert the USB
transceiver.
1 Insert the installation CD enclosed.
An installation wizard appears on your PC screen.
2 Install the MediaControl software by following the onscreen
instructions.
When the software is installed, the MediaControl icon appears in
the taskbar on your PC screen.
3 When requested in the
installation wizard, insert the
USB transceiver in the
dedicated port on your PC.
The USB transceiver will be
recognized and installed
automatically.
When the USB transceiver is
correctly installed, the
MediaControl icon turns
orange: .
4 After the USB transceiver is installed, insert the batteries in the
remote control, as shown.
SRM7500 - Instructions for Use
4