Filter
Top Products
54
Button Functions, cont.
Button Functions
Note: The REC button must be pressed TWICE to record from
your VCR. For some brands of VCRs, you might need to press the
REC button once, then press it again for three seconds.
Some buttons on the remote might have functions that are referred
to by different names on the device you are controlling. E.G.
LAST may be called RECALL, or ENTER may be called
DISPLAY. These differences depend on the brand and model of
your product. Also, this remote can only operate features that
exist on your product. E.G., your product must have LAST ability
for the LAST button to operate this feature.
1. Liquid Crystal Display (LCD): Helps with setup and
displays the Mode the remote is in, and time, etc.
2. TV, VCR, DVD, etc.: Selects product to be operated.
3. GUIDE: Displays on-screen program or channel guides.
4. +100: Used for channels greater than 100.
(-): Used for digital channels, e.g. 2-3.
5. MENU: Brings up the DVD disc Menu screen - use with
the UP, DOWN, LEFT & RIGHT navigation buttons.
6. OK/SELECT: Selects menu items for the device you
are controlling.
7. UP, DOWN, LEFT & RIGHT: Navigation buttons.
8. VOLUME UP/DOWN: Changes the volume level of the
product, normally the TV.
9. THUMBS DOWN: Sets your Thumbs ratings.
10. MUTE: Turns off the TV sound while the picture
remains.
11. REPLAY: Replays the last 8 seconds of a program.
12. INPUT: Brings up the DVD Player’s Setup Menu.
13. RECORD, PLAY, STOP, REW, FF, PAUSE: VCR control
buttons operate your VCR even when the remote is set to
operate the TV. Also operates DVD Scan -/+.
14. SLEEP: Turns off the TV after a period of time.
15. CC (SUBTITLE): TV Closed Caption (if your TV has
this feature) or DVD Subtitle toggle.
16. SETUP: Used for setup.
17. MACRO: Works with digits 1 thru 8, to program and
store up to 8 button sequences of your choice.
18. SAP: Selects Secondary Audio Program channel if
available.
19. ZOOM: Zooms or enlarges a specific area of the screen.
ARC: Aspect Ratio Control selects viewing format for
the displayed picture, e.g., Wide, Zoom, etc.
20. SWAP: Swaps TV PIP screens.
21. PIP: TV Picture-in- Picture control.
22. ADVANCE: Catches you up to the live broadcast.
23. TV/VCR/DVR: For some TVs, press repeatedly to
select available viewing sources (antenna, cable box,
VCR, etc.).
24. LAST - Returns to the previously selected channel, or
DVD repeat toggle.
25. THUMBS UP: Sets your Thumbs ratings.
26. CHANNEL UP/DOWN: Changes the channels.
CHAPTER +/- controls DVD/CD track selection i.e.
DVD/CD Track Skip Up/Down (in DVD and SAT
modes). Note the VCR buttons also control DVD when
in DVD Mode.
27. QUIT/RETURN - Exits On-Screen Menus/Returns to
previous On-Screen selection.
28. ENTER: Used after direct channel number entry to
immediately change to the selected channel.
29. INFO: Displays/selects on-screen channel information,
etc.
30. NUMBERS: Enter numbers for direct channel
selection. Some products require Enter to be pressed
after channel selection.
31. POWER: Turns product On or Off.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
31.
30.
29.
28.
27.
26.
25.
24.
23.
22.
21.
20.
19.
18.
17.