Philips VR299/75 VCR User Manual


 
— 21 —
Correction
Insert the cassette with the window side up and the record
tab facing you.
Check that a cassette tape is not already inserted. Press
EJECT 0.
Make sure the AC power cord is correctly connected to
an AC outlet.
If the
(Timer) indicator is lit on the display, press
POWER to cancel timer recording, then press EJECT
0.
Make sure the record tab on the back of the cassette is not
removed. (P.12)
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/OTR , or when
you press POWER to set timer recording.
S
PECIFICATIONS
Design and specifications are subject to change without notice.
General
Mains voltage AC 110V – 240V
Mains frequency 50/60Hz
Power consumption Approx. 18 watts
Ambient temperature +5°C to +40°C
Relative humidity 10% to 80%
Dimensions Approx. 360(W) x 94(H) x 281(D) mm
Mass Approx. 3.4kg
Position for use Horizontal
Video output channel UHF 36 (adjustable between 28 — 60)
Possible number of TV channel 99
Number of pre-programmable memory blocks 8
Number of days in advance 365 or every day, or every week
Tuner
Aerial input B/G, D/K, I, K1
VHF L: 42 — 175 MHz
VHF H: 175 — 470 MHz
UHF: 470 — 870 MHz
Video
Input (VIDEO IN) 0.5 to 2.0 Vp-p, 75 ohms
Output (VIDEO OUT) 1.0±0.2 Vp-p, 75 ohms
Resolution Better than 230 lines
Signal/noise ratio Better than 43 dB
Audio
Input (AUDIO IN) –8 dBs, 50k ohms (0dBs=0.775 Vrms)
Output (AUDIO OUT) –8 dBs, 1k ohms (0dBs=0.775 Vrms)
Accessories supplied Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA (only for checking operations)
VR299/499-75 EN 7/6/99, 3:46 PM21