Filter
Top Products
13
13
ENGLISH USING A SATELLITE RECEIVER
UUssiinngg aa ssaatteelllliittee rreecceeiivveerr
Those TV channels which are received via a satellite receiver
connected (to the scart socket
AAVV22 EEXXTT22
) can be viewed on the
video recorder on programme number E2. On the remote
control press the number button
00
and then the button
==PP--
to
select this programme number. The TV channels of the satellite
receiver are selected not on the video recorder itself, but directly
on the satellite receiver.
3 The on-screen menu appears. Use the buttons
==PP--
and
;;PP++
to select the menu point MANUAL
SEARCH and confirm with
OOKK
4 Use
==PP--
or
;;PP++
to select the option
DECODER
5 Using
PP
or
QQ
, activate the setting ON.The
display will show DEC. When selecting
OFF the decoder will not be allocated
PP
AARRDDOONN
??
WWhhaatt iiss aann oonn--ssccrreeeenn mmeennuu??
The on-screen menu takes the mystery out of using
your new video recorder.All settings and recording
steps can be done easily via the on-screen menu by
following the corresponding instructions on the
screen.
6 Confirm with
OOKK
and leave the on-screen
menu with the
MMEENNUU
button.The screen will
show the message STORED
TTIIPP
CChheecckk ddeeccooddeerr aallllooccaattiioonn aatt aa ggllaannccee
There is no need to call up the on-screen menu to check
to which TV channel on the video recorder a decoder is
allocated. Simply use
==PP--
and
;;PP++
to select a TV channel.
If DEC appears in the display, a decoder is allocated to
this channel.
MANUAL SEARCH
PROGRAMME NUMBER QP01P
S-CHANNEL NO.
CHANNEL NUMBER 21
DECODER OFF
EXITPMENU STOREPOK
MAIN MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
SPECIAL SETTINGS
EXITPMENU OK