Filter
Top Products
ENGLISH PROBLEM SOLVING (TIMER PROGRAMMING)
35
35
PPrroobblleemm ssoollvviinngg ((TTiimmeerr pprrooggrraammmmiinngg))
EErrrroorr mmeessssaaggee::
SSWWIITTCCHH TTOO SSTTAANNDDBBYY --
TTIIMMEERR RREECCOORRDDIINNGG
A recording was programmed, but the video recorder was not switched into
timer mode with the Standby button. Press
SSTTAANNDDBBYY//OONN mm
in order to make
the programmed recording.Warning: if you do not do this, the video recorder
will not record.
EErrrroorr mmeessssaaggee::
NNOO CCAASSSSEETTTTEE
A recording was programmed, but there is no cassette in the machine. Insert a
cassette ready for recording without erase protection.
EErrrroorr mmeessssaaggee::
AALLLL TTIIMMEERRSS OOCCCCUUPPIIEEDD
All the available memory locations in your video recorder for timer and
VIDEO Plus programming are full. Delete a programmed recording (see chapter
Delete / check / change programmed recordings).
kk aanndd//oorr vv aarree
ffllaasshhiinngg iinn tthhee ddiissppllaayy
ooff tthhee vviiddeeoo rreeccoorrddeerr
A recording was programmed, but there is no cassette in the machine. Insert a
cassette ready for recording without erase protection.
A recording was programmed, but the video recorder was not switched into
timer mode with the Standby button. Press
SSTTAANNDDBBYY//OONN mm
in order to make
the programmed recording.Warning: if you do not do this, the video recorder
will not record.
CCaasssseettttee iiss eejjeecctteedd
aafftteerr pprrooggrraammmmiinngg
A cassette with erase protection was inserted. Please deactivate the erase
protection or insert another cassette which is ready for recording.
CCaasssseettttee iiss eejjeecctteedd
dduurriinngg rreeccoorrddiinngg
The end of the tape was reached during a programmed recording.The recording
could not be completed satisfactorily.
TThhee sseett ccaannnnoott bbee
uusseedd dduurriinngg rreeccoorrddiinngg
Once started,a recording can only be interrupted by pressing the
SSTTAANNDDBBYY//OONN
button
mm
. WARNING: This will not only stop the recording,but it will also delete
the programmed recording from the memory of the video recorder.
PROBLEM
SOLUTION
FFOORR
EEXXPPEERRTTSS
RReeccoorrddiinngg vviiaa eexxtteerrnnaall ssoouurrcceess
If you want to watch or record transmissions from a
satellite receiver, films from a video camera (or from
other external devices),connect the device to the scart
socket
EEXXTT11 AAVV11
or
EEXXTT22 AAVV22
and select the
programme number on your video recorder E1 or
E2.
YYeeaarr//mmoonntthh//ddaattee//ttiimmee
ddiissppllaayy aappppeeaarrss
The time has not been set or not set correctly.After entering / confirming year,
month, date and time, you can continue programming.