Filter
Top Products
ENGLISH
C
ONNECTING ADDITIONAL DEVICES
9
9
5 Take the enclosed mains cable and connect
the appropriate end to the mains socket
44
on the back of the video recorder and the
other to the nearest free socket
6 Switch on your TV set and select on y
our TV
set the programme number which will in
future be used for operation with the video
recorder
7 On your TV change the settings of this
programme number until you see the
adjacent welcome screen clearly and in
colour on the screen
PPRROOBBLLEEMM
8 Switch off the video recorder with the
standby button
mm
88 TThheerree iiss nnoo tteesstt iimmaaggee
44
Your video recorder broadcasts on the
frequency 583MHz (CH35) in the UHF range (ultra
highfrequency). Repeat the matching of the
selected programme numbers on the TV set.
44
Check the cable connections
3 Remove the aerial cable plug from the back of
your TV set and insert it into the aerial
socket
22
on the back of the video recorder
4 Take the enclosed aerial cable and connect
the appropriate end to the aerial socket of
your TV set and to the TV socket
33
on the
back of the video recorder
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
CONTINUEPOK
CCoonnnneeccttiinngg aaddddiittiioonnaall ddeevviicceess
Additional devices, such as a decoder,camcorder,satellite receiver,etc.,can be
connected to the scart socket
AAVV22 EEXXTT22
on the back of the video recorder.
You will need a scart cable for this (available from specialist stores).
AV2 EXT2