Filter
Top Products
Chapter 3: Installation and Setup
40
MMG Installation, Setup, and Operations Guide
Preset 3: SD MXF S422 I-Frame only and SD MXF E422 I-Frame only
1. To setup a codec, go to Edit menu > Control Panel and select Site Tab.
2. Double click Codec Presets.
3. Select the “MPEG-2 MP@HL (M2V)” codec as starting point. Click the two plus symbols on
the right to duplicate this preset (see Figure 3-32 on page 35). In the Fileformat pull-down list
box select MXF.
4. Type a descriptive name for the preset you want to create in the textfield. For this example,
enter SD MXF s422.
5. To edit the Codec Properties click the top Edit button. In Codec Properties select a maximum
Bitrate of 50 MBit/s. Keep the I-Frame only unchecked. Check the 4:2:2 checkbox.Click the
accept icon.
Figure 3-42: MXF Codec Properties
6. For this example select 50 MBit/s. For Height, choose Normal 480/576 or Extended 512/608,
(both are supported). Set Profile Constraints to None.
7. Click accept changes icon.
8. Close all active option windows.