Filter
Top Products
Video/Audio Adjust menu07
40
En
Audio Adjust
From the Audio Adjust menu you can set the Audio DRC (Dynamic
Range control).
Audio DRC
• Default setting: Off
When watching Dolby Digital BD and DVD discs, as well as PC files
with Dolby Digital audio, at low volume, it’s easy to lose the quieter
sounds completely — including some of the dialog. Switching
Audio DRC to On can help by bringing up the quieter sounds, while
controlling loud peaks.
How much of a difference you hear depends on the material you’re
listening to. If the material doesn’t have wide variations in volume,
you may not notice much change.
Important
• Audio DRC is effective with the following types of audio:
– Analog audio from the AUDIO OUT (2ch) and AUDIO OUT
(5.1ch) jacks.
– PCM audio from the DIGITAL AUDIO OUT and HDMI OUT
jacks (see also About the audio output settings on page 44).
1 Press HOME MENU and select ‘Video/Audio Adjust’ from
the on-screen display.
2 Select ‘Audio Adjust’.
3 Highlight Audio DRC, then use the / buttons to change
to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.
4 Press ENTER or RETURN to make the setting and exit the
Audio Adjust screen.
Home Menu
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
Video/Audio Adjust
Video Adjust
Audio Adjust
Audio Adjust
Audio DRC
Off
Max