Pioneer DV-353 DVD Player User Manual


 
Connecting Up
02
13
En
The setup described here is a basic setup
that allows you to play discs using just the
cables supplied with the player. In this setup,
stereo audio is played through the speakers
in your TV.
This player is equipped with copy
protection technology. Do not connect
this player to your TV via a VCR (or your
VCR via this player) using AV cables, as
the picture from this player will not
appear properly on your TV. (This player
may also not be compatible with some
combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
1 Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable, connect-
ing the red and white plugs to the audio
outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to use S-Video or
component video cables for the video
connection.
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
DIGITAL AUDIO OUT
S
L
R
P
R
P
B
Y
COAXIAL
OPTICAL
COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
TV
A/V IN
Easy connections
To power outlet