Pioneer DV-353 DVD Player User Manual


 
The Initial Settings Menu
07
41
En
Digital Audio Out settings
Digital Out
Default setting: On
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
On
Off
Initial Settings
If at any time you need to switch off the
digital audio output, set this to Off, other-
wise leave it On.
Note that you can’t switch on/off the optical
and coaxial outputs individually.
Dolby Digital Out
Default setting: Dolby Digital
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
Dolby Digital
Dolby Digital > PCM
Initial Settings
If your AV receiver (or other connected
component) is Dolby Digital compatible, set
to Dolby Digital, otherwise set to Dolby
Digital > PCM.
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD player,
including audio, and video output settings,
audience limitation settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This
is usually because a disc is playing. Stop the
disc, then change the setting.
1 Press SETUP and select ‘Initial Set-
tings’ from the on-screen display.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or
region.