Filter
Top Products
Getting Started
04
21
En
Let’s Get Started
When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can set
up the player to work with the kind of TV you
have, then either use the Setup Navigator to
make more settings, or jump right in and
start playing some discs.
GUIDE
RETURN
ENTER
1 Press ENTER to move on to the next
screen.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
Next
Switching on
After making sure that everything is con-
nected properly and that the player is
plugged in, press
STANDBY/ON on the
front panel, or on the remote control to
switch the player on.
Also, switch on your TV and make sure that it
is set to the input you connected the DVD
player to.
STANDBY/ON
Î
3
OPEN/
CLOSE
0
8
7
1
4
¡
¢
DV-353
STANDBY/ON
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the
correct video input (not a TV channel).
For example, if you connected this
player to the VIDEO 1 inputs on your TV,
switch your TV to VIDEO 1.
• This player features an auto power off
feature. If the disc tray is closed but no
disc is playing and no control is pressed
for 30 minutes, the player automatically
goes into standby.