Filter
Top Products
Initial Settings menu07
46
En
Speakers settings
Audio Output Mode
• Default setting:
2 Channel
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set this
to
5.1 Channel
; if you connected only the
stereo outs, set to
2 Channel
.
Note
• Even if you set
Audio Output Mode
to
5.1
Channel
, you’ll only get sound from all
speakers when playing a 5.1 channel multi-
channel disc.
• When set to
5.1 Channel
, only the front
left/right channels are output from the
AUDIO OUT (2ch)
jacks. Change to
2
Channel
if you want to listen to downmixed
stereo audio (for example, because you are
listening through the TV’s built-in
speakers).
• When set to
5.1 Channel
there is no digital
output when playing DVD-Audio.
• If you set to
2 Channel
, Dolby Digital, DTS
and MPEG audio is mixed down to two
channels so you still hear all the audio
recorded on the disc. With DTS encoded
audio, you can choose how the signal is
downmixed to PCM audio. See
DTS
Downmix
on page 44 to change the
downmix setting.
• Some DVD-Audio discs don’t allow down-
mixing of audio. These discs always output
multi-channel audio regardless of the
setting made here.
Setting
Option What it means
Audio Output
Mode
2 Channel
The player outputs analog audio in stereo only. See also
Audio Output Mode
below.
5.1 Channel
The player outputs 5.1 channel analog audio. See also
Audio
Output Mode
below.
Speaker Distance –
Specify the distance of your speakers from your listening
position.
Speaker Distance
on page 50.
Speaker
Installation
–
Specify the number and size of speakers in your system. See
also
Speaker Installation
on page 51.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Distance
Speaker Installation
2 Channel
5.1 Channel
Initial Settings
DV46AV_EN.book 46 ページ ２００６年６月９日 金曜日 午後４時３３分