Filter
Top Products
12
En
Rear Panel
1 DIGITAL OUT jacks (coaxial, optical (OPT.))
Use to output the digital audio signal recorded on
discs. You can output the digital signal via either
coaxial or optical output jack to an AV amplifier or
receiver (page 16).
2 CONTROL IN jack
Use to connect this player to another component
bearing the Pioneer Î mark. This lets you control
this unit as though it were a component in a system.
Player operations are then performed by pointing the
remote control at the component that the player is
connect to (page 18).
3 TV SYSTEM switch (except for DV-525 Taiwan
model)
Use to change the TV signal mode to either PAL or
NTSC according to the type of TV and disc to be
used. When the switch is in the AUTO position, the
player outputs the format on the disc as is (page 18).
4 VIDEO OUT SELECT switch (DV-525 only)
Use to set which output is used to output the video
signals. Select either video/S-video or component
video signal output depending on the connections
you make (page 17).
5 VIDEO OUT jack
Connect to the video input on a TV or monitor or AV
amplifier or receiver with video input capability
(pages 15 and 17).
6 S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear
picture reproduction is possible by connecting the
player to your TV or monitor via the S-Video jack
(page 17).
7 COMPONENT VIDEO OUT jacks (DV-525 only)
If your projection monitor, projector or similar
component has component video inputs, you can
produce a higher quality picture on your projection
monitor or projector by connecting to the component
video outputs on this unit. When using these jacks,
be sure to set VIDEO OUT SELECT to the right
position (page 17).
8 ATTENUATOR switch (DV-525K only)
Usually set to the OFF position. When enjoying
karaoke, switch to the ON position if the sound is
distorted.
9 AUDIO OUT jacks
Use to output two-channel audio (analog) to the
audio stereo inputs on a TV or stereo amplifier. If you
are connecting to a receiver that has both digital and
analog input jacks for DVD player connection, it may
be beneficial to make both connections (pages 15
and 16).
0 AC IN power cord connection terminal
Use to connect the power cord to the wall outlet
(page 15). (The AC power cord of the Taiwan model
is built into the player.)
DV-525
(The TV SYSTEM switch and AC IN power cord connection
terminal are not present on the DV-525 Taiwan model.)
DV-525K
CONTROL
VIDEO
OUT
SELECT
COMPONENT
VIDEO OUT
OPT.
DIGITAL OUT
AUDIO OUT
AC IN
VIDEO OUT
IN
RL
S-VIDEO OUT
Y
P
B
P
R
TV SYSTEM
AUTO
PAL
NTSC
12 43 567 9 0
CONTROL
OPT.
DIGITAL OUT
AUDIO OUT
ATTENUATER
ON OFF
AC IN
VIDEO OUT
IN
RL
S-VIDEO OUT
TV SYSTEM
AUTO
PAL
NTSC
1
3
8
2
5 6
9
0