Filter
Top Products
27
En
1 Press 7 (stop) (7 on the front panel).
Playback stops.
2 Press OPEN/CLOSE (0 on the front panel).
The disc tray comes out.
3 Remove the disc.
4 Press STANDBY/ON on the front panel (
on the remote control.
4
Press on the remote control.
The disc tray goes back in.
5
Press POWER on the front panel to turn the
player’s power off.
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
STANDBY/ON
0
4
¢
1
¡
7
8
3
23
4,(5) 1
0
4
¢
1
¡
7
8
3
GETTING STARTED USING YOUR DVD PLAYER
1
5
5
5
5
4
¢
1
8
7
eE
¡
3
2
4,(4)
Resuming playback from where
you stopped –– DVD/Video CD
With this player, it is possible to resume play of a DVD
even when play has been stopped.
Press 7 (stop) once to enable play to resume
from a point shortly before the DVD was stopped
when 3 (play) is pressed again.
• Pressing 7 (stop) twice to causes the disc to return to
the beginning when 3 (play) is pressed again.
• When 7 (stop) is pressed, “RESUME” appears in the
display for as long as resume playback is possible. If
the function is canceled, “RESUME” disappears and
the disc format appears in the display.
Note
Resume play is only possible when the power is kept on, the
disc is loaded, and 7 (stop) has not be pressed twice in
succession (“RESUME” appears in the display). If you want to
continue viewing a DVD at a later time or date, it is
recommended to use the Last Memory function described on
page 45.