Filter
Top Products
97
PRV-LX10
En
English
Symptom
During loading of DV, the screen
stops, and controls are disabled.
Several seconds of noise occurs
when inputting DV.
Recorded image has visible
noise.
Cannot confirm USB HDD.
When inputting DV, video and
audio are not synchronized, or
input stops.
Cause/Remedy
¶ The screen may freeze and controls may fail to respond if the DV
link is disconnected. Hold the STANDBY/ON button depressed
for 4 seconds or more to set to the standby mode, then turn on
the power once again.
¶ Several seconds of noise may occur if the DV link is
disconnected. If the noise does not stop after several seconds,
stop the recording and try reconnecting the DV cable, or
reconnect the main unit's power cord.
¶ If the TV system setting is changed after beginning recording,
noise may be occur in the image.
¶ Use a hub supporting USB 2.0.
¶ This symptom may occur when the DV link is disrupted due to
attaching and detaching the cable, or due to electrostatic noise.
Try recording/preview once more from the beginning.
Specifications
General:
Power rating: AC 220 V – 240V, 50/60 Hz
Power consumption: Maximum 1.0 A
Power consumption during idling: 6.5 W
Peak inrush current (Power on): 30 A
Weight: 16.5 kg (36 lb 6 oz)
External dimensions: 427 (W) x 179.5 (H) x 539.5 (D) mm (including projecting parts)
16-13/16 (W) x 7-1/16 (H) x 21-1/4 (D) in (including projecting parts)
Ambient temperature during use: +5 °C to +35 °C (+41 °F to +95 °F)
Ambient humidity during use: 5 – 85% RH (without condensation)
Recording:
Recording format: DVD: DVD-Video
HDD: VOB FILE
Recordable discs: DVD-R
DVD-RW
Video recording format:
Sampling frequency: 13.5 MHz
Compression: MPEG
Audio recording format:
Sampling frequency: 48 kHz
Compression format: Dolby Digital and Linear PCM (non-compressed)
Recording time
DVD-R/RW (manual rate) : About 1 – 6 hours
HDD (manual rate): About 23 – 100 hours
Playback:
Playable discs: DVD-Video, DVD-R, DVD-RW (CD-R, CD-RW, and CD-ROM are supported for
data read only)
Video input:
Composite: BNC x 1, 1.0 Vp-p, 75 Ω
S-VIDEO: 4-pin mini DIN x 1
Y: 1.0 Vp-p, 75 Ω
C: 0.286 Vp-p (NTSC), 0.300 Vp-p (PAL), 75 Ω
Component: BNC x 3
Y: 1.0 Vp-p, 75 Ω
B-Y: 0.525/0.7 Vp-p selectable (NTSC), 0.525 Vp-p (PAL), 75 Ω (with 75% color bar)
R-Y: 0.525/0.7 Vp-p selectable (NTSC), 0.525 Vp-p (PAL), 75 Ω (with 75% color bar)
Malfunctions may be caused by static electricity or other external sources. In such cases, normal operation may be restored
by disconnecting the power cord and then reconnecting it again. If problem persist, consult your dealer.
Reference page
TROUBLESHOOTING
33