Filter
Top Products
DVD-V7400, DVD-V7300D
60
Apply one of the following methods to reset the player after an error
has occurred:
Use ?P to determine the Active mode of the player
Use ?X, ?W, ?M, ?H, ?H ?S to determine the player information,
model name, clock time, player region code, the setting of
Industrial Player Menu, etc.
Use ?F, ?T, ?C, or ?R to determine the current frame, time,
chapter, title/track number, respectively.
Use ?V, ?D, ?K, ?G, ?Y, or ?Q to determine the disc information,
disc type, total frame number, TOC information, etc.
4. Error Messages
If an error occurs during a command execution, the player returns an error code. The table below lists each code with a description of the error:
The status functions are summarized below:
Status Reporting
Auto Status
Auto Completion Message
Error Indication Message
Request Status
Code Message Description
E00 Communication error Communication Line Error due to framing error or buffer overflow
E04 Feature not available Non-Usable Function has been tried - either the command mnemonic is wrong or the
command can not be used in this mode
E06 Missing argument Correct parameter is not specified
E11 Disc does not exist There is no disc in the tray
E12 Search error Search address is missing
Read error of Text File; (When the command [UU] is executed)
E15 Picture stop Playback has been stopped by a picture stop code while in the Auto Play mode
E16 Interrupt by other device The command(s) sent via the serial line were not executed before commands were sent
from the front panel buttons and/or remote control
Forced end of the data transfer while Text File sends to PC (When the command [UU] is
executed)
E99 Panic Unrecoverable Error occurred - possible that a disc cannot be loaded and/or playing does
not continue
5. Initial Setting
The following table provides the default internal register and switch settings. Take care to set each to the required parameters when creating
an application program.
Register/Switch Setting at Power ON
Key Lock 2 : If set to 2 power is OFF
0 : All other cases
Video Switch 1 : ON
Audio Switch 3 : Audio 1
Display Switch 0 : OFF
Address mode 1 : Time
Speed Parameter 30 : 1/2 Speed
CCR 3 : Mode 3
Register A 3 : Title/Chapter and Frame Display (DVD)
Track/Time Display (CD, VCD)
Register B 0 : Normal Squelch
Register D 0 : CR