Filter
Top Products
Recording
06
48
En
• Use the number buttons to enter the PlusCode
number. (To clear the last digit entered, press
CLEAR
.)
• Press
REC MODE
to change the recording quality
(see also
Setting the picture quality/recording time
on
page 43). If Manual Recording is on, then you can
also select the
MN
setting.
• Use the
/
(cursor left/right) buttons to select the
Once
,
Daily
or
Weekly
recording option.
2 After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
• If you haven’t set up the guide channels (or at least
the guide channel for the PlusCode number that you
entered), the recorder will prompt you to enter the
channel number that the TV program is showing on.
Tip
• You can check the timer program settings by
pressing
TIMER REC
to display the timer recording
screen.
VCR Plus+ programming with the power off
You can enter a PlusCode number when the recorder is
in standby.
Important
• You can’t use this feature until you have set up the
guide channels. See
VCR Plus+ CH Setting
on
page 73
• You can’t change the recording mode.
• You can’t program daily or weekly timer recordings.
1 Press ‘VCR Plus+’.
The front panel display shows the current recording
mode and prompts you to enter the PlusCode number.
2 Use the number buttons to enter the PlusCode
number.
• To clear the last digit entered, press
CLEAR
.
3 Press ENTER.
The display shows the timer settings:
Date
Start time
End time
Recording channel.
• If
CODE ERROR
appears in the display, check that
the PlusCode number is correct and start again from
step
1
.
• If
CAN’T SET
appears in the display, it means that
although you entered a valid PlusCode number, the
program has already finished.
Stopping or extending a timer recording in
progress
After a timer recording has started, you can cancel or
extend recording.
1 Press and hold
ì
REC for 3 seconds.
Only the program is canceled (the timer indicator
disappears); recording continues.
2 If you want to stop recording completely, press
STOP REC.
• To extend recording, press
ì
REC
repeatedly to
extend recording in 30 minute increments.
ENTER
CLEAR
VCR Plus+
PLUSCODE
29324
REC STOP REC
ì
DVR-03_KU.book Page 48 Wednesday, July 16, 2003 1:59 PM