Pioneer DVR-433H-S DVD Recorder User Manual


 
Recording
05
44
En
VIDEO Plus+ programming with the power
off
You can enter a PlusCode programming number when
the recorder is in standby. Note that the recording is
always made to the HDD. If you want to record to a DVD
disc, you’ll need to switch on the power and use the full
VIDEO Plus+ program screen.
Important
You can’t use this feature until you have set up the
guide channels. See
Set VIDEO Plus+ CH
on page 93.
You can’t change the recording mode.
You can’t program daily or weekly timer recordings.
1 Press ’VIDEO Plus+ (SHIFT + MENU)’.
The front panel display shows the current recording
mode and prompts you to enter the PlusCode
programming number.
2 Use the number buttons to enter the number.
To clear the last digit entered, press
CLEAR
.
3 Press ENTER.
The display shows the timer settings:
Date
Start time
End time
HDD and Recording
channel
Recording mode.
If
CODE ERROR
appears in the display, check that
the number is correct and that the guide channel is
set (see
Set VIDEO Plus+ CH
on page 93), then set
the timer recording again.
If
CAN’T SET
appears in the display, it means that
although you entered a valid number, the program
has already finished.
Setting a manual timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU
, select
Timer
Recording
, then
Timer Recording
).
This screen shows all the timer programs currently set.
Each row is for one timer recording program, with the
date and time information, channel, recording mode,
DVD or HDD and recording status.
The amount of free space available on the HDD and
the currently loaded recordable DVD is shown
towards the bottom of the screen.
In the upper-right corner, the number of timer
programs already set is shown next to
Tmr Pgms
.
If there are more than five timer programs already
set, press
to switch page (go back using the
button).
You can also delete a timer program before it’s
started (before the recorder enters timer recording
standby) by highlighting it and pressing
CLEAR
. See
also
Deleting a timer program
on page 46.
TOP
MENU
MENU
DISC NAVIGATOR
HOME
MENU
TV/DVD
DISPLAY
RETURN
AUDIO
HELP
CLEAR
INPUT SELECT
SUBTITLE
ANGLE
VIDEO Plus+
CHANNEL
SKIP
TV DRECT REC
ENTER
REC MODE
ST0P REC
REC
SHIFT
ONE TOUCH
COPY
BACK CM
ì
TOP
MENU
MENU
DISC NAVIGATOR
HOME
MENU
RETURN
S
HOW
V
IEW
SKIP
TV DRECT REC
ENTER
REC MODE
ST0P REC
REC
SHIFT
ONE TOUCH
COPY
BACK CM
ì
HDD Remain
DVD Remain
59h59m(SP)
1h59m(SP)
SAT 26/3 15:00
Tmr Pgms 4/32
Manhattan Open Tennis OK
SAT 26/3 18:00 – 21:00 Pr 10
World Journey OK
SUN 27/3 19:30 – 21:00 Pr 4
Flower Until 30/4
MON – FRI 13:30 – 14:00 Pr 8
New Input
Timer Program View
DVR-433H_UK.book 44 ページ 2005年3月1日 火曜日 午後5時6分