Pioneer DVR-433H-S DVD Recorder User Manual


 
The Initial Setup menu
13
98
En
Still Picture Field
Produces a stable, generally shake-free image.
Frame
Produces a sharper image, but more prone to shake than Field stills.
Auto •
The recorder automatically selects Field or Frame type still, according
to the material playing.
Seamless Playback On
Playback is smooth, but with a trade-off against the accuracy of the
edit points.
Off •
You may notice momentary interruption at edited points during play-
back of a VR mode Play List.
Parental Lock Set Password
In order to change the parental lock level or change the country/area
code, set the password using this option. From the following screen,
enter a four-digit number that will be your password.
Change Password
In order to change the password, first enter your existing password
and then a new one from the following screen.
Change Level
From the following screen, first enter your password and then set a
parental lock level.
Country/Area Code
From the following screen, first enter your password and then set a
country/area code.
Only certain discs have parental lock and country code features. Check the disc packaging to see what features the disc has. If you forget your
password you can reset it by resetting the recorder to its factory settings. See Resetting the recorder on page 111.
Angle Indicator On •
A camera icon appears on-screen during multi-angle scenes on a
DVD-Video disc.
Off
Nothing is indicated on-screen when a multi-angle scene is showing.
Options
On-Screen Display On •
The recorder displays operation displays (
Stop
,
Play
, etc.) on-screen.
Off
Switches off the on-screen operation displays.
Front Panel Display On •
The time is shown in the front panel display when the recorder is in
standby.
Off
The front panel display is switched off in standby (although it still lights
dimly when setting a timer recording).
Remote Control Mode Recorder 1–3
(default: Recorder 1)
If you are using more than one recorder in the same room, set them to
different IDs. This setting sets the recorder ID; to change the remote
controller ID, press and hold
RETURN
then press
1
,
2
or
3
to set. The
remote will only control a recorder with the same ID.
AV. Link This Recorder Only •
Signals received through the AV input when the recorder is in standby
are not passed through to the AV output.
Pass Through
Signals received when in standby are passed though to the output for
connected devices. (Note that during EPG data download, the EPG
data is not passed through.)
When set to
Pass Through
, make sure to set Power Save (page 92) to
Off
.
Setting
Options Explanation
DVR-433H_UK.book 98 ページ 2005年3月1日 火曜日 午後5時6分