Filter
Top Products
The Video/Audio Adjust menu
12
90
En
•
White AGC
– Turn on for automatic white level
adjustment.
1
•
White Level
– Adjusts the intensity of white.
•
Black Level
– Adjusts the intensity of black.
•
Black Setup
– Corrects the standard reference black
level (NTSC video input only).
•
Gamma Correction
– Adjusts the brightness of
darker images.
•
Hue
– Adjusts overall balance between red and
green.
•
Chroma Level
– Adjusts how rich the colours
appear.
4 Use the
/
buttons to adjust the currently
selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
You can now use the preset for any other input or the
built-in TV tuner.
Tip
• To see more of the picture as you adjust different
settings, press
ENTER
after selecting the setting you
want to adjust.
Setting the picture quality for disc
playback
This setting determines how the picture will look when
playing discs.
Choosing a preset
1 With a disc playing (or paused), press HOME
MENU and select ‘Video/Audio Adjust’.
2 Select ‘Video Adjust’
3 Use the
/
buttons to change the setting.
There are six presets available:
•
TV(CRT)
– suitable for standard cathode-ray tube TVs
•
PDP
– suitable for plasma display screens
•
Professional
– suitable for professional monitors
•
Memory1
– user preset 1
•
Memory2
– user preset 2
•
Memory3
– user preset 3
You can press
DISPLAY
(
SHIFT
+
HELP
) to see the
individual settings for the current preset (
TV(CRT)
,
PDP
or
Professional
).
4 Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings for disc playback.
1 Follow
Choosing a preset
above and select one of
the user presets (Memory 1, 2 or 3).
2 Move the cursor down and select ‘Detailed
Settings’.
3 Select the picture quality setting you want to
adjust.
You can adjust the following settings:
• Prog. Motion
– Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema
– This setting optimizes the picture for
film material when the video output is set to
progressive. Usually this is best left set to
Auto 1
; try switching to
Auto 2
,
On
or
Off
if the
picture appears unnatural.
•
YNR
– Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• BNR
– Adjusts the amount of noise reduction (NR)
applied to the block noise (artefacts visible in areas of
flat colour, caused by MPEG compression).
•
Detail
– Adjusts how sharp edges appear.
•
White Level
– Adjusts the intensity of white.
Note
1.When
White AGC
is
On
, the
White Level
setting can’t be adjusted.
Detailed Settings
TV(CRT)
Detailed Settings
Memory1
Memory1
YNR
Detail
BNR
Motion Still
Off
Max
White Level
PureCinma
Prog. Motion
Black Level
Auto1
Max
Max
Off
Off
Min
Max
MaxMin
DVR-433H_UK.book 90 ページ ２００５年３月１日 火曜日 午後５時６分