Filter
Top Products
Connecting up
02
19
En
Controlling this player from
another Pioneer component
This player has SR jacks which allow you to
use the remote sensor on one Pioneer compo-
nent to control another.
Use a mini-jack plug to connect the
CONTROL OUT
of one component to the
CONTROL IN
of another. In this way you can
daisy-chain several components together.
• My TV doesn’t have any inputs to connect
the DVD player. How can I watch DVDs?
If your TV has no inputs you can’t use this
player with it.
• My VCR is already connected to my TV, so
there aren’t any spare inputs. What should
I do?
If all your TV’s inputs are already in use,
you can buy a video input selector from an
electronics store, which effectively gives
you more inputs.
• My TV only has one input for the sound.
What should I plug it into?
If you don’t mind mono sound, you can
buy a stereo RCA-to-mono RCA cable
from an electronics store. Connect the
stereo end to this player and the mono
end to your TV.
If you want stereo sound, connect this
player to your amplifier or stereo system
using a stereo audio cable.
•I connected the DVD player to my AV
receiver, and although the sound is fine,
there’s no picture. What did I do wrong?
Make sure that the correct video input is
selected on your TV.
Also make sure that the type of video
connection from the DVD player to your
AV receiver is the same as that from the
receiver to your TV. Most AV receivers
won’t convert from one kind of connection
to another.
S
P
R
PB
Y
COAXIAL
OPTICAL
CONTROL
IN OUT
DIGITAL
AUDIO OUT
COMPO
VIDEO OUT
Pioneer AV receiver
Pioneer CD pla
y
er, etc.
CONTROL
OUT
CONTROL
IN
DV563.book 19 ページ ２００３年４月２５日 金曜日 午後８時１１分