Filter
Top Products
Additional information
10
84
En
Noticeable difference in
DVD and CD volume.
• This is due to differences in the audio format and is not a
malfunction.
Cannot play multi-
channel audio
• Make sure that
Audio Output Mode
is set to
5.1 Channel
(
page 66
).
• Check that the Dolby Digital, DTS and MPEG Out settings
(
pages 55
–
56
) are suitable for your amplifier/receiver—check the
instruction manual that came with your amplifier/receiver.
• DVD-Audio and SACDs do not output multichannel digital audio.
Listen through the player’s analog outputs.
• Check that the settings in the Speaker Installation screen are
correct (
page 67
).
• Check the audio options available from the disc menu.
Cannot listen to high-
sampling rate audio
through the digital
output.
• Make sure that
Linear PCM Out
is set to
Down Sample Off
(
page 55
).
• As a copy-protection measure, some DVDs do not output 96kHz
audio. In this case, even if set to
Down Sample Off
, the player
automatically outputs the audio at 48 kHz. This is not a malfunction.
Cannot output 192kHz or
176.4kHz digital audio.
• The player does not output digital audio at these sampling rates. The
digital output is automatically downsampled.
Cannot output 96kHz or
88.2kHz digital audio.
• Check that
Linear PCM Out
is set to
Down Sample Off
(
page 55
).
• Some discs are digital copy protected and do not output high
sampling rate digital audio. In this case the output is automatically
downsampled.
No DTS audio output.
• If this unit is connected to a non-DTS compatible amplifier or
decoder using a digital audio cable, set
DTS Out
to
DTS
>
PCM
(
page 55
). If you do not do this, noise will be output when you play a
DTS disc.
• If this unit is connected to a DTS-compatible amplifier or decoder
using a digital audio cable, check the amplifier settings, and that the
cable is properly connected.
Audio mix does not
sound right or sounds
incomplete (for example,
inaudible dialog).
• Make sure that
Audio Output Mode
is set to
2 Channel
if you've
connected to the stereo inputs on your amplifier or TV (
page 66
).
Disc containing the MP3
tracks won’t play.
• This player is compatible with multi-session discs, but only plays
sessions that are closed.
• If the message
Can’t play this format
is displayed (
NO PLAY
in the
front panel display) when you try to play a disc/track, check the audio
file formats. For more information see
page 10
.
Problem
Remedy
DV563.book 84 ページ ２００３年４月２５日 金曜日 午後８時１１分