Filter
Top Products
7
En
Part Names and Functions
English
8
9
7
0
-
2
3
4
5
6
1
Remote Control Unit
1 SCREEN SIZE button
Press to select the screen size (page 21).
2 INPUT buttons
Use to select the input (page 19).
3 MENU button
Press to open and close the on-screen menu
(pages 17 to 30).
4 ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various settings on the
unit.
Usage of cursor buttons within operations is clearly indicated at the
bottom the on-screen menu display (pages 17 to 30).
5 SET button
Press to adjust or enter various settings on the unit (pages 17 to 30).
6 MUTING button
Press to mute the volume (page 20).
7 AUTO SET UP button
When using computer signal input, automatically sets the POSITION
and CLOCK/ PHASE to optimum values (page 26).
8 STANDBY/ON button
Press to put the unit in operation or standby mode (page 19).
9 DISPLAY button
Press to view the unit’s current input and setup mode (page 20).
0 POINT ZOOM button
Use to select and enlarge one part of the screen (page 23).
- VOLUME (+/–) buttons
Use to adjust the volume (page 20).
Part Names and Functions
When handling the remote control unit
¶ Do not drop or shake the remote control.
¶ Do not use the remote control unit in a location
subject to direct sunlight, heat radiation from a
heater, or in a place subject to excessive
humidity.
¶ When the remote control unit’s batteries begin
to wear out, the operable distance will gradually
become shorter. When this occurs, replace all
batteries with new ones as soon as possible.
Inserting the batteries in the
remote control unit
CAUTION
¶ Insert batteries so that the plus (+) and minus (–) sides are
aligned according to the markings in the battery case.
¶ Do not mix new batteries with used ones.
¶ The voltage of batteries may differ even if they are the same
shape. Please do not mix different kinds of batteries
together.
¶ When not using the remote control unit for a long period of
time (1 month or more), remove the batteries from the
remote control unit to prevent leaking of battery fluid. If
battery liquid has leaked, thoroughly wipe the inside of the
case until all liquid is removed, and then insert new batteries.
¶ Do not charge, short, disassemble or throw the provided
batteries in a fire.
When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area. H048 En
While pressing down lightly, slide
in the direction of the arrow.
Two AA (R6)
batteries