Filter
Top Products
72
<ARB1527>
REMOTE CODE SET UP
REMOTE CONTROL UNIT SETTING BUTTONS
1 EDIT/LEARN button
EDIT: When the EDIT/LEARN button is pressed at the
same time as number button 1, the mode will
change to preset code edit mode. (See page
68.)
LEARN: When the EDIT/LEARN button is pressed at the
same time as number button 2, the unit’s
capability to learn and store command codes
from other remote control units will be activated.
(See page 70.)
2 Mode switch
Use to switch the remote control unit modes.
3 Light button
When this button is pressed, all the buttons on the remote
control unit will light. The lighting will turn off if no
operations are performed within five seconds.
This button is used for performing operations in dark places.
RECEIVER CONTROL BUTTONS
When a Pioneer receiver is connected to the Monitor, the
receiver can be operated using buttons 4 to 6.
When another company’s receiver is connected to the Monitor,
have the signals for 4 to 6 learned (see page 70).
4 RECEIVER POWER button (STANDBY/ON)
Turns receiver power on and off.
5 RECEIVER INPUT button
Selects the input source connected to the receiver.
6 RECEIVER VOL (volume) +, - buttons
Adjusts receiver volume level.
Press the plus button (+) to increase the volume and the
minus button (-) to decrease it.
7 (RECEIVER) MUTING button
Allows the receiver’s mute signal to be learned.
This button is used when the mode switch has been set to
something other than TV/DTV.
TV/
DTV
CBL
/SAT
DVD
/LD
VCR
1 2
POWER
INPUT
VOL VOL
3
4 65
7 98
0
INPUT
1 2 3 4
TV DTV
ON/OFF
CH
ENTER
5
∞
2 3
SET/
ENTER
MENU
SUB CH
SELECT
FREEZE
SPLIT
DTV
SOURCE
INFO
SCREEN
RECEIVER
4
¢
MENU
MODE
AUDIO
DISPLAY
GUIDE
8
CH
RETURN
POWER
POWER
SEARCH
VCR REC
CH
TV
VOL
ANT
FAVORITE CH
17 3¡
POWER
PROJECTION MONITOR RECEIVER
REMOTE CONTROL UNIT
Î
MUTING
EDIT/
LEARN
DTV/SAT
DTV/DVD TOP
DTV/(SAT)
TV/SAT/DVD
Transmitting LED
1
4
5
3
2
6
7
USING THE TV REMOTE
CONTROL UNIT TO CONTROL
OTHER DEVICES