Filter
Top Products
3
About the Advanced MCACC Application (Continued)
Things you can accomplish with this application
1. Advanced EQ Setup, which you can do with the receiver (see page 50 in the receiver’s Operating
Instructions), allows you to choose the optimum time period for auto EQ setup. You can use this
application’s reverberation characteristics (Reverb) as a guide in choosing the best time period for
your room.
For details, see
How to Interpret the Graphs
(page 18).
2. Skewed reverb frequency characteristics in your listening room can prevent you from enjoying an
accurate sound field. The graphs displayed by this application are a powerful tool because they
allow you to check these reverb frequency characteristics at a glance. You can also check the
effectiveness of steps that you take to improve the acoustics of your listening room, for example,
installing sound absorbent material.
For details, see
How to Interpret the Graphs
(page 18).
3. The Group Delay graphs allow you to check the group delay characteristics before and after
calibration.
For details, see
Reading the group delay characteristics graph (Group Delay)
(page 25).
4. The MCACC parameters display (Parameters) allows you to display on the computer all the
parameters (measurement values) stored in the receiver’s MCACC memories.
For details, see
Display of the MCACC parameters
(page 26).