Filter
Top Products
INSTALLATION & OPERATIONAL SGLV MANUAL
28
L20-407 rev.1 (3/14)
1. Filter Pan
2. Filter Pickup Assembly
3. Filter Strainer Cap
4. Filter Paper
5. Filter Screen
12.1.2. REPLACING THE FILTER MEDIA (IF EQUIPPED)
Refer to the following procedure to replace the filter media if the appliance is equipped with a filter
drawer.
1. Detach the pickup tube from the filter pickup assembly by unscrewing it (counterclockwise),
at the knurled fitting, from the threaded fitting on the filter screen.
2. Slide off the filter paper clip and remove used filter paper from filter screen. Replace with
new filter paper, ensuring that the hole in the paper is on the top, so that threaded fitting in
filter screen protrudes through it.
3. Fold filter paper to the underside of the filter screen and replace filter paper clip.
4. Re-attach filter pickup tube to the filter screen
by screwing it (clockwise) into the threaded
fitting in filter screen.
5. Reinstall the filter pickup assembly into the filter
system by placing the newly covered screen
portion of the assembly into the filter pan and
connecting the quick disconnect on the filter
pickup assembly into white donut fitting on the
left-hand side of the appliance. Ensure that it
snaps tightly and securely into donut fitting.
WARNING
The power supply must be disconnected before cleaning and servicing this appliance!
WARNING
The contents of the crumb catch and/or filter pan of any filter system must be emptied into a fireproof
container at the end of the frying operation each day. Some food particles can spontaneously combust
into flames if left soaking in certain oil/shortening materials.