Filter
Top Products
-13-
4. CONFIGURATION
The FT-90X Web Smart Media Converter provide Web interface for Switch smart function configuration and make the
Switch operate more effectively - They can be configured through the Web Browser. A network administrator can manage
and monitor the FT-90x from the local LAN. This section indicates how to configure the media converter to enable its smart
function.
4.1 Main Menu
After a successful login, the main screen appears, the main screen displays the converter Welcome page. The screen in
Figure 4-1 appears.
Figure 4-1 Web Main screen
As listed at the left of the main screen, the configurable smart functions are shown as below:
System – Check the hardware, software version and System MAC address and IP address of the converter.
Port Configuration - Setup per port Speed/Duplex mode, Flow Control and In/Out bandwidth control.
Converter Configuration – Setup the broadcast storm control, QoS and converter LLR mode.
Converter Status – Shows the converter’s copper and Fiber ports linking status.
Statistics – Shows the statistics of packet count from copper and Fiber ports.
Tools – Provide tools to Reboot / Factory Reset / Firmware Update / Configuration Upload the converter.