Filter
Top Products
-31-
Figure 4-20 Configuration restore screen
Factory Reset
The Factory Reset button can reset the FT-90x back to the factory default mode. Be aware that the entire configuration
will be reset, and the IP address of the FT-90x will be set to “192.168.0.100”.
Figure 4-21 Factory Reset screen
Once the Factory Reset item is pressed, the screen in Figure 4-22 appears.
Figure 4-22 Factory Reset screen
"Note:
To reset the IP address to the default IP Address “192.168.0.100”. Press the hardware reset button
at the front panel about 10 seconds. After the device be rebooted. You can login the management
WEB interface within the same subnet of 192.168.0.xx.
Hardware Reset button