Filter
Top Products
Menu Operation
1. Use the On Screen Display menu to set and adjust functions
2. Use 【CH+】/【CH-】 to select the desired menu after pressing【MENU】, then press 【VOL+】
/【OK】to enter the corresponding menu and use 【CH+】/【CH-】to choose from the menu option;
Use 【VOL+】/【VOL-】to adjust the options value and return to the previous menu by pressing
【MENU】again. The menu will disappear without any operation within 10 seconds.
Function Introduction
In TV, AV, S-VIDEO, YPbPr and PC modes
Ⅰ Picture
● Brightness
To adjust the picture’s brightness
● Contrast
To adjust the picture’s contrast.
● Sharpness
To adjust the picture’s definition.
● Colour
To adjust the picture’s color.
● Tint
To adjust the picture’s tint. (For NTSC signal only)
Note: Picture menu options in other signal sources. AV/S-VIDEO: the same as in TV
mode
YPbPr/PC: only two options of Brightness and Contrast
ⅡSound
● Volume
To increase or decrease the volume.
● Balance
To balance the volume between the left and right
speakers.
● Woofer
To turn on/off the woofer.
● Spatial
To turn on/off the surround.
● Equalizer (submenu)
Use 【 VOL+ 】/ 【OK 】to enter the Equalizer
(submenu), you can increase or decrease the value
of the sound output in every frequency band
preferred
Note: The Audio menu options are the same in TV
signal as well as in other signal sources
10